Skip Navigation

Find Classes

Search Results

The following course information is effective for the Spring 2018 term.

EET 113 Solid State Electronics

This course is an introduction to semiconductor devices and their applications. Operating principles and characteristics of diodes, transistors, JFETS, MOSFETs and thyristors are discussed. Transistor models using the h and r parameters are covered. Various transistor configurations and biasing techniques are studied. Device functionality and applications are discussed and range from power supplies, voltage regulators, small signal/power amplifiers, amplifier response analysis (Bode Plot) to operational amplifiers.

Prerequisite: MTH 122 and EET 175

Typically Offered: Offered fall only

Offered Spring 2018: No

  • Subject:
    EET
  • Units:
    4.00

EET 115 Electronic Laboratory Techniques

An introduction to electronic measurement techniques, the identification and testing of electronic components, and Ohm's law and power law. Lab safety concepts, proper use of basic laboratory equipment such as oscilloscopes, DMM, power supplies, frequency counter and signal generators are introduced. Additional topics include: soldering and desoldering of components, breadboarding, how to keep a lab notebook and schematic reading. The student will be expected to pursue and complete a laboratory project of his/her choice with the instructor's approval.

Corequisite: EET 170

Typically Offered: Offered fall and spring only.

Offered Spring 2018: Yes

Open EET 115 Class Schedule

  • Subject:
    EET
  • Units:
    2.00

EET 170 DC Circuit Fundamentals

Topics include definition of voltage, current, resistance, conductance, and power. Also includes Ohm's Law, Kirchhoff's Laws as applied to series, parallel and series-parallel circuits. Calculation of power dissipation, use of voltage and current dividers, recognition and use of Wheatstone Bridge circuits.

Prerequisite: College Reading and Writing Readiness Recommended: MTH 117

Typically Offered: Offered fall and spring only.

Offered Spring 2018: Yes

Open EET 170 Class Schedule

  • Subject:
    EET
  • Units:
    2.00

EET 173 DC Analysis-Network Theorems

Introduction to network theorems and solutions, to include Thevenin's Theorem, Norton's Theorem, Mesh analysis, Nodal analysis, Superposition and other analysis techniques.

Prerequisite: EET 170 Corequisite: MTH 122

Typically Offered: Offered fall and spring only.

Offered Spring 2018: Yes

Open EET 173 Class Schedule

  • Subject:
    EET
  • Units:
    2.00

EET 174 AC Fundamentals

Introduction to AC circuit fundamentals. Study of circuitry consisting of AC sources, resistors, inductors, capacitors and transformers. Course material covers, reactance, impedance, vectors, current and voltage phase relationships, apparent and reactive power, complex notation. Q, resonance and filters are discussed.

Prerequisite: EET 170 and MTH 122 Corequisite: MTH 123

Typically Offered: Offered fall and spring only.

Offered Spring 2018: Yes

Open EET 174 Class Schedule

  • Subject:
    EET
  • Units:
    2.00

EET 175 AC Analysis and Circuit Theorems

AC network theorems and solutions, to include Thevenin's Theorem, Norton's Theorem, Max Power Transfer Theorem, Mesh analysis, Nodal analysis, superposition and other analysis techniques. Series and parallel resonance will also be included with discussion of passive filter operation. EET 175 is a continuation of EET 174 for the Electrical Engineering Technology AAS degree.

Prerequisite: EET 174 Corequisite: MTH 123

Typically Offered: Offered fall and spring only.

Offered Spring 2018: No

  • Subject:
    EET
  • Units:
    2.00

EET 211 Advanced Solid State Electronics

This is a continuation of EET 113 with an emphasis on the development of frequency response characteristics of operational amplifiers, open and closed loop response, negative and positive feedback, active filters, oscillators/timers, voltage regulators, basic op-amp circuits, data conversion circuits and control circuits.

Prerequisite: EET 113

Typically Offered: Offered spring only.

Offered Spring 2018: Yes

Open EET 211 Class Schedule

  • Subject:
    EET
  • Units:
    4.00

EET 216 Microprocessors I

Introductory course in microprocessors dealing with hardware and software. The Pic micro controller will be used as the target processor. Hardware configuration including CPU, Memory, I/O, and Assembly language programming with the PIC 16F84 instruction set will be studied. This course also provides a means to learn about embedded Microcontroller-based programming techniques through the use of Microchip integrated MPLAB environment.

Prerequisite: EET 223 AND MCS 141 or CIT 134 or consent of instructor

Typically Offered: Offered spring only.

Offered Spring 2018: Yes

Open EET 216 Class Schedule

  • Subject:
    EET
  • Units:
    4.00

EET 223 Introduction to Digital Electronics

(Formerly EET 213) This course covers principles of operation, performance, and design of digital circuits and digital instrumentation. Number systems including binary; Boolean algebra and the application to digital logic; combinational and sequential circuits; digital logic application to electronic instrumentation; basic Hardware Description Language (VHDL) and lab work with CMOS & FPGAs (Field Programmable Gate Arrays) will be covered.

Prerequisite: MTH 122 or MTH 144 AND EET 115 (C or better) OR Department Consent

Typically Offered: Offered fall and spring only.

Offered Spring 2018: Yes

Open EET 223 Class Schedule

  • Subject:
    EET
  • Units:
    4.00

EET 230 Electrical Machinery

Principles of design and construction of many types of motors and generators including servos, synchros, motor and generator control circuits, and industrial application. Course oriented to troubleshooting and repair techniques. NOTE: ELC 114 is recommended.

Prerequisite: EET 170, EET 174 or ELC 172

Typically Offered: Offered fall only

Offered Spring 2018: Yes

Open EET 230 Class Schedule

  • Subject:
    EET
  • Units:
    3.00


Printable Class Schedules

View online, blended, late start, weekend, Lakeshore, Southlake and extension site schedules in PDF format:

Other Options

Advanced Class Search

Use the advanced class search to search by course number, class meeting days and times, instructor or location.

Apply, Enroll and Pay

Current Students

Login to the myCLC portal and go to the Student Center to search and register for classes.

Mobile App

Get the CLC mobile app to find classes.